← Build log
Rust RepairSeptember 25, 2026

Floor's done, glass is out, jack is dead

The inside of the car is ready for paint. Every soft spot in the floor, front to back, has been cut out and patched, and the whole interior has been wire brushed down to solid metal. Front floors, rear floors, tunnel, seams. Nothing left to cut. From here it's the same treatment the trunk got: clean, prep, and two coats of POR-15.

Then the back glass. It had to come out so the channel underneath can be cleaned up and sealed with everything else, and I figured on an hour. It took most of the afternoon. The hardest substance known to man is not diamond, it is 50-year-old window sealant. It doesn't cut, it doesn't peel, and it holds glass to a car like it was poured yesterday. The glass is out in one piece and sitting on a stand, and the channel shows exactly why it needed to come out. The old sealant had let go in spots and the metal under it has been sitting wet.

The last hour went to the A-arms. A few bushings came out of the lower arms on the press, and then the hydraulic jack we were using for the press quit mid-bushing. Not a great day for tools. The rest of the bushings wait on a new jack.

Share thisFacebook

← Rear floor comes out, front clip goes blackInterior in POR-15, A-arms off the Press →